instal the last version for mac Geo Router

Instal the last version for mac Geo Router upgrade#

The location's local DNS identified as: ' ' is routing to the West coast, and the GTM (8x8's DNS) is routing to the East coast. To identify geo-routing issues look through the DNS test results and locate the following message:Ĭonflicting DNS resolutions: Two or more DNS Servers are in disagreement overĪs an example this user has a routing issue to the Poly SBC as well as the Secure SBC (Extensions with SRTP enabled): This is perfectly fine and expected, but NetUtil version 2.2 does not interpret this correctly. This is why when looking at line 35 and 39 you will see U.S.

Instal the last version for mac Geo Router upgrade#

This testing is particularly useful for troubleshooting “Line Unregistered” for SRTP enabled lines, and call quality issues.ĭue to updates in 8x8's Global Reach design implemented in Nov of 2021 NetUtil 2.2 no longer reports the results correctly, it is recommended that you upgrade to version 2.3 of the Network Utility Application which has been updated to properly reflect the new Global Reach routing. 8x8's Global Reach technology will return multiple data centers in a single region to ensure stability in the event of an outage by making the devices aware of several different resources in that region. Similarly you should enable all bands – the more bands you have the greater the data capacity and performance for your network.DNS Testing tests the network's DNS against the 8x8 GTM (8x8 DNS) to verify devices are geo-routing to the correct data center.

By selecting all you ensure that your devices will always connect using the fastest radio mode they can use. Choose all the radio modes available to youĪpple recommends that you select all the radio modes available to you: Wi-Fi 2 through Wi-Fi 6 (that’s 802.11a/g/n/ac/ax). Apple also indicates that limiting MAC addresses wouldn’t prevent unauthorised access to your network and notes that MAC addresses can easily be copied, spoofed (impersonated), or changed. However there are a few reasons why doing so would be a bad idea, one disadvantage is that some Apple devices will periodically change their MAC address. You can set up your router to allow only devices with specified MAC (media access control) addresses to join your network, which you might think would stop unknown devices from joining your network. Doing so would disable authentication and encryption and allows anyone to join your network. Use WPA3 Personal if you canĪpple recommends WPA3 Personal for better security, although you can use WPA2/WPA3 Transitional with older devices (we don’t have WPA3 on our router).Īpple discourages people from using any settings that turn off security, such as None, Open, or Unsecured. When connected to a hidden network, your device might show a privacy warning because of this privacy risk.” If you want to make sure your network is secure we recommend reading this: Apple says “using a hidden network might expose information that can be used to identify you and the hidden networks you use, such as your home network. Don’t hide your network nameīeware that while you can set your router to hid its network name this doesn’t necessarily conceal it from detection and unauthorised access.

All routers on your network should also use that same name for every band they support – don’t give 2.4GHz and 5GHz bands different names. This is so that there won’t be clashes with other routers in your neighbourhood. You need to use a unique case-sensitive name for your Wi-Fi network (also known as a SSID – service set identifier).